Top Pick Trolling Motor Battery Suppliers & Manufacturers

By Gerald, Updated on October 8, 2024

Share the page to

A trolling motor battery provides constant power for a boat for slow, steady propulsion and maneuvering. Opposite to starting batteries designed for quick bursts of energy, trolling motor batteries need to provide constant power for a longer time. Only the best battery manufacturers or suppliers can craft the best trolling motor battery. Therefore, this guide will explore the best 5 trolling motor battery manufacturers and suppliers in 2024. So you can select the most suitable battery for your needs.

Part 1. What is the trolling motor battery?

It is a deep-cycle battery specifically designed to supply constant power to the trolling motor on a boat. For steady maneuvering, the trolling motor battery plays a key role. Usually, it requires a 12V power to run the trolling motor. However, if the boat is large and has a bigger trolling motor, it may require a 24V or 36V trolling motor battery. In such a situation, you will need to connect two or three motors in series mode to increase the voltage. Similarly, the capacity of the battery also depends on the power needs of the trolling motor. A motor drawing 10A power from a 100Ah capacity battery will last for 10 hours. Therefore, choosing the battery capacity and voltage relies on the trolling motor power needed.

Part 2. Trolling motor battery types

Trolling motor batteries are specifically designed to provide consistent, reliable power for extended periods, often in demanding marine environments. Here are the primary types you’ll encounter:

1. Lead-Acid Batteries:

Flooded Lead-Acid: These are the most traditional type, requiring regular maintenance (topping off water levels) due to water loss during charging. They offer good performance at a lower cost but are heavier and have a shorter lifespan compared to other types.
Gel-Cell: Similar to flooded lead-acid but with a gel-like electrolyte that is less prone to spillage. They require less maintenance and are more tolerant of vibration.
AGM (Absorbed Glass Mat): These use a glass mat separator to absorb the electrolyte, making them virtually spill-proof and highly resistant to vibration. They offer excellent performance, long life, and can be charged faster than flooded lead-acid.

2. Lithium-Ion Batteries:

Lithium-Ion Phosphate (LiFePO4): These are gaining popularity due to their high energy density, lightweight, and long lifespan. They offer superior performance, faster charging times, and can handle more discharge cycles. However, they are generally more expensive.

Factors to Consider When Choosing

Performance: The desired power output and run time will influence your choice. Lithium-ion batteries often provide higher performance and longer run times.
Maintenance: Lead-acid batteries, especially flooded types, require more maintenance. AGM and gel-cell batteries are more low-maintenance.
Cost: Lithium-ion batteries are generally more expensive upfront but can be more cost-effective over their longer lifespan.
Charging: Consider the charging infrastructure available and the charging time requirements. Lithium-ion batteries often charge faster.
Weight: If weight is a concern, lithium-ion batteries are typically lighter.

Part 3. Top 5 trolling motor battery manufacturers & suppliers

Ufine Battery
Renogy
Dakota Lithium
JYC Battery
Microvast

1. Ufine Battery

Overview

Ufine Battery shines prominently in the trolling motor battery world. It is a Chinese battery manufacturer founded in 2008 and registered as Guangdong Ufine New Energy Co., Ltd. The original name is Dongguan Ufine Electronic Technology Co, Ltd, known as Ufine. It has headquarters in Shenzhen China. Ufine produces more than 1000 specs of batteries in lithium-ion and lithium polymer chemistries. Ufine has 30 R&D experts, 200 production personnels, and over 35 sales professionals.

Ufine utilizes A-grade raw material to ensure top-quality batteries. Each battery goes through rigorous testing with international standards to verify its quality and performance. Therefore, Ufine Battery manufactures the best trolling motor battery to boost the boating experience.

Although Ufine Battery is not large in scale, its more flexible customization options provide more choices for small and medium-sized enterprises.

From the best price range to advanced features, best customer support to after-sale services Ufine will not disappoint you.

Key Features of Ufine Trolling Motor Battery

High energy density and power output
LiFePO4 chemistry batttery gives 2,500+ cycle life
High-temperature tolerant
Lightweight battery design
Performs well in freezing temperature
Suitable price range
Multiple protection functions
MSDS certified battery (More certifications can be customized, such as UN38.3, FCC, PSE, CE)
Customization availability

2. Renogy

Overview

Renogy was founded in 2010 and has headquarters in Ontario, California. It started as a small project by a small group of students at Louisiana State University. Gradually, it started to grow with the help of the Louisiana Business and Technology Center. Renogy is on a mission to make 50 million independent power for their power needs through renewable energy generation and storage till 2030. The company has established an R&D center to provide leading and innovative products. Renogy mainly produces solar panels, batteries, and several accessories. The company manufactured its products through collaboration with third-party manufacturers. However, product quality and performance remain the highlighting feature. By choosing Renogy, it can provide a smart, innovative, and long-lasting trolling motor battery.

Key Features of Renogy Trolling Motor Battery

LiFePO4 battery chemistry
ABS housing and anti-corrosion terminals
5 to 8 years Long-lasting battery life
IP65 water protection
A true 100A BMS with low-temperature cut-off
More certifications (MSDS, UN38.3, FCC , PSE, CE, UKCA, IEC62619)

3. Dakota Lithium

Overview

Dakota Lithium was founded in 2008 and is headquartered in Bismarck, North Dakota, USA. It is a well-known global leader in providing long-lasting lithium batteries with a longer warranty period. Dakota manufactures its products with third-party manufacturers, mainly from China, under strict parameters quality control and ISO 9001 certified engineering. It maintains design, engineering, and quality control standards from its headquarters in the U.S. Despite increasing lithium prices, Dakota manages to keep its battery prices within the range and backs its product with an 11-year warranty with technical support. If you want a battery for a longer run, Dakota is a trustworthy trolling motor battery supplier.

Key Features of Dakota Lithium Trolling Motor Battery

11-year long battery warranty
Lightweight for easy mobility
A balance between price and quality
Auto cell balancing
Low and high voltage cut-off
Support fast charging
More quality and safety certifications

4. JYC Battery

Overview

JYC Battery Manufacturer Co., Ltd is a leading producer of lead-acid batteries founded in 2000. Its headquarters is in Guangzhou, China, and it has 24 years of experience in the industry. With over 240 models in its 2V, 4V, 6V, and 12V VRLA battery series, JYC offers capacities ranging from 1.3Ah to 3000Ah. It operates two production bases located in Shaoguan, China, and Malaysia, employing over 1,500 staff. The company utilizes advanced automated production lines and cutting-edge testing equipment to ensure high product quality. JYC serves diverse markets, offering customized solutions for solar, UPS, automotive, and motorcycle applications, as well as trolling motor batteries, supported by a strong supply chain.

Key Features of JYC Trolling Motor Battery

LiFePO4 chemistry for 2000 charge cycle
Internal cell balancing
Active BMS to control battery
ABS plastic shell anti-rust and corrosion
Battery life up to 5 – 7 years

5. Microvast

Overview

Micorvast is an American battery manufacturer founded in 2006. Its headquarters is located near Stafford, Texas. It innovates, designs, develops, and manufactures lithium-ion batteries for several applications. The company is known for cutting-edge technology and vertical integration capabilities. Having 17 years of manufacturing experience, Microvast has 3 manufacturing plants producing 30,000 batteries and has over 2,000 employees worldwide. From raw material to finalized product delivery, Microvast uses high-tech automatic manufacturing machinery. Big investors like IFC and DOE have invested a lot in this company. Overall, being a manufacturer and supplier of lithium batteries, Microvast can be the right choice for your trolling motor battery.

Key Features of Microvast Trolling Motor Battery

LiFePO4 technology makes battery light
Long battery life up to 3000 cycle charge
Smart monitoring feature
Strong ABS plastic shell
Intelligent BMS integration
Fast charging to reduce downtime

Part 4. Final thoughts

Choosing the right trolling motor battery manufacturer is essential for getting the most out of your boating experience. A high-quality battery ensures consistent power, longevity, and peace of mind while you’re on the water. Therefore, when selecting a manufacturer, it prioritizes advanced technology, superior materials, expert craftsmanship, and excellent customer support. So, your investment in a product will deliver lasting performance and reliability. Our top 5 best trolling motor battery manufacturers have almost everything that you are looking for to choose.

Related Tags: